Black Flowing Stone Flexible Stone
Black Flowing Water Stone is a flexible stone in the Vein Stone & Natural Texture series. Its surface features a black tone and flowing water stone texture. It is lightweight, thin, flexible, and bendable, suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores, and showrooms. This page provides specifications and packaging parameters, material and performance details, installation methods and acceptance points, along with applicable scenarios and selection recommendations; free samples and bulk project quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name:Black Flowing Stone Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Line stone and natural texture
- Craftsmanship: Natural linear stone texture
- Main tone:Deep black tone, calm and restrained
- Texture features:Flowing vertical line texture, with flowing patterns and natural transitions
- Recommended scenarios: Hotels, clubs, commercial stores, showrooms
- Main applications: Building wall
Black Flowing Stone Flexible StonePart of the IGOODS linear stone and natural texture product line, and the one in this line leaning toward "weight and presence." It has a strong sense of linear order, suitable for surfaces where the wall should be read with rhythm and direction. It can quickly establish a visual center of gravity in large spaces and better set off light-colored elements, so it is more readily prioritized for walls that need to control structural load.
Flexible stone is a type of veneer material used more often in recent years in commercial fit-outs and exterior walls. In inquiries and searches, this type of product is also often called soft stone panels, flexible stone-look veneer, bendable stone, or ultra-thin flexible exterior wall stone.
The actual photographed texture characteristics of flowing stone
Observing the real-shot details of the black flowing water stone flexible stone, it can be seen that it has an overall deep black tone, steady and restrained. As for the texture specifically, it belongs to the category of "flowing-water-like vertical line pattern, with flowing texture and natural transitions." The texture density is evenly distributed across the same piece of material, and the texture performance at the edges and corners is basically consistent with that of the central area.
The surface response of this color is rather restrained: it does not turn white under strong light, nor does it go flat under weak light, so transitions between areas of different illuminance within the same space are relatively natural.
If you want richer spatial layering, you can pair several shades from the same series as primary and secondary walls; for full-wall installation, it is recommended to use materials from the same batch to ensure overall color consistency.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 1160×2680 | 3.5-7 | 24 | 45 | 140 | 1250×2800×450 | 1120 |
Optional colors:White, black (other colors customizable)
Packaging notes:Mainly packed in wooden crates, better suited to long-distance transportation and bulk project delivery; export orders can be upgraded to export wooden crates. The specifications, weights and packaging data in the table are for reference, and the actual order confirmation shall prevail.
Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.
Material and performance parameters
At the material and performance level, several points about this type of material need to be clarified first. The raw material is mainly natural minerals, formed with a polymer flexible substrate, with no wood substrate used, so there is no hidden risk of formaldehyde release. In terms of physical performance, ultra-thin lightness and bendability are two basic characteristics, from which a series of construction advantages derive, such as not cracking, not deforming, and easy conformity to irregular substrates.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
Please note that the performance of flexible stone is closely related to substrate conditions, adhesive selection, and installation workmanship. The table above presents the general characteristics of the material itself. For the engineering indicators of Black Flowing Water Stone flexible stone in specific projects, please refer to the valid test report for the selected model and the project technical confirmation.
Key installation and construction points
Construction does not rely on a framing system; after the substrate is leveled, it can be directly adhered. Mature methods are available for flat and curved surfaces, columns and irregular curtain walls, old walls, and insulated walls.
Substrate treatment
Flexible stone can be adhered to substrates such as cement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, and insulated wall surfaces. The substrate should be dry, free of floating dust, and free of hollowing; if flatness is insufficient, leveling or local repair should be done first, and walls with too high moisture content need primer sealing treatment first.
Measurement and layout
During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.
Cutting and hole drilling
Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.
Pasting installation
Both dry-bonding and wet-bonding processes are compatible. Use a dedicated adhesive for flexible stone, apply with the full-surface bonding method, spread evenly with a notched trowel, and press firmly after installation to ensure there are no obvious voids between the back of the board and the substrate. For outdoor facade construction, a weather-resistant adhesive suitable for the external environment must be used.
Compaction and adjustment
Corners and edges are where flexibility problems most easily appear: the four corners must be compacted separately, and adjacent panels should be checked with a straightedge for flatness. If height differences are found, address them immediately while the adhesive has not yet begun to set.
Edge finishing and acceptance
Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.
What commercial spaces is Black Flowing Stone Flexible Stone suitable for?
The following explains, by project type, where it is suitable and the main reasons for choosing it.
Hotel lobbies and corridors
Lobby walls are usually large in area and viewed for long periods, so any splicing discontinuity or color difference in the material will be magnified. This type of flexible stone has stable color tone within the same batch, making continuous application over large areas easy.
Clubhouses and reception spaces
Clubhouse walls usually carry the role of creating atmosphere, with higher demands on material texture and feel than on pattern. This type of texture has layering under side light and is suitable for use with wall-washing lights.
Commercial storefronts and street blocks
Retail and street-block project interfaces must attract attention while withstanding long-term use. These material surfaces are stain-resistant and fade-resistant, suitable for storefront interiors, main in-store walls, and pedestrian circulation areas.
Showroom and display backdrop
The walls of exhibition spaces are essentially a "background" that needs to support the exhibits rather than compete with them. This type of texture has detail up close and reads as a unified whole from a distance, making it suitable for continuous background surfaces.
What product features does Black Flowing Stone Flexible Stone have?
- Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
- Flexible and bendable: It can conform to the curvature of the substrate; this is the most fundamental difference from rigid stone. The degree of bending is related to panel thickness, so it is recommended to confirm the bendable radius at the design stage.
- No substrate preparation required for installation: It does not rely on a framing system; after the substrate is leveled, it is applied directly to the wall, giving greater flexibility in scheduling and labor organization.
- Low-maintenance:The surface does not easily retain marks, and high-frequency use locations in public spaces do not require additional protective measures.
- Project coordination: Can assist in calculating quantities and layout plans according to project drawings, and provide technical coordination during the construction phase to reduce on-site rework.
- High degree of form freedom: Bendable, cuttable and capable of full-panel wrapping; curved walls, columns and irregular entrance headers no longer need to be split into multiple small pieces for assembly.
Project selection and procurement key points for Black Flowing Stone Flexible Stone
For commercial decoration companies and full-package renovation companies, the priority in material selection is usually the construction period, labor and acceptance, rather than the material's own color pattern. Flexible stone directly corresponds to these three points: no keel is required for construction, no complex base preparation is needed, and it can be adhered after the wall is leveled, saving one structural process.
The material is flexible, crack-resistant, and impact-resistant, and can adapt to complex site environments. New installers can get up to speed quickly, which helps compress the schedule and labor costs. Fire resistance, moisture resistance, and weather resistance indicators also meet the requirements of routine project acceptance.
Procurement demand is geographically widespread: local projects value response speed, while cross-regional projects place more emphasis on bulk supply and production scheduling capability.
Lightweight and safe exterior wall stone, flexible decorative stone for indoor and outdoor universal use, a relatively high-frequency search direction in commercial renovation material selection.
Black Flowing Stone Flexible Stone FAQ
What common specifications are available for Black Flowing Stone Flexible Stone?
The specific available specifications for Black Flowing Stone Flexible Stone are shown in the "Specifications and Packaging Parameters" table above. Flexible stone regular stock covers multiple sizes and supports customization of large slabs, small slabs and special-shaped sizes. Actual supply specifications must be confirmed in combination with the selected thickness and packaging method.
Does a difference in thickness lead to different usage scenarios?
There is a difference. Thinner specifications are more suitable for interior walls and shaped cladding, while thicker specifications have more margin on exterior facades and in locations with higher impact resistance requirements. When selecting, it is recommended to judge together with the substrate conditions and usage environment.
Can samples be sent first?
Yes. IGOODS provides physical samples for design material selection, texture confirmation and project material evaluation. Due to natural differences between batches, it is recommended to use samples from the same batch for final confirmation before large-area construction.
Is construction of irregular shapes troublesome?
Compared with hard stone, the advantage of flexible stone in irregular positions lies in its ability to wrap the entire surface in one piece, reducing assembly seams. However, the more complex the shape, the higher the requirements for layout and finishing, and it is recommended that experienced installation crews carry out the work.
About IGOODS
IGOODS takes flexible stone and wood veneer wall panels as its core product systems, using natural mineral raw materials composited with polymer flexible substrates, belonging to inorganic ecological materials, zero formaldehyde, meeting the environmental standards for home decoration, commercial decoration, outdoor engineering and foreign trade export.
The company positions itself as a wall space material solution provider rather than a mere panel supplier, and can provide material selection, physical samples, design coordination and engineering project support for architectural designers, decoration companies, engineering clients and building materials channel clients. Foreign trade orders can be supplied on a one-stop basis, and it has long undertaken overseas exterior wall decoration, building renovation and landscape landscaping needs.
From interior walls to building facades, from full commercial interior fit-outs to municipal projects and old city renovation, flexible stone has a relatively wide range of applications. As a source factory, we support free sample mailing, customization according to drawings and preferential pricing for engineering batches; for foreign trade, we can provide one-stop supply, with complete qualifications and test reports, nationwide shipping and after-sales technical support.
Black Flowing Stone Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.