White South Island age marks flexible stone

White South Island age marks is a flexible stone in the linear stone and natural texture series, with a white tone and South Island age-mark texture on the surface, lightweight and flexible, bendable, suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores, and showrooms. This page provides specifications and packaging parameters, materials and performance, installation methods and acceptance key points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.

IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.

Category:South Island's Trace Release:2026-11-13

Product quick information

  • Product name: White South Island age marks flexible stone
  • Brand: IGOODS
  • Product category: Flexible Stone
  • Series: Line stone and natural texture
  • Craftsmanship: Natural linear stone texture
  • Main tone: Light white tone, clean and bright
  • Texture features: Vertical linear texture and natural traces of time, with fine texture and soft transitions between light and dark
  • Recommended scenarios: Hotels, homestays, clubs, boutique commercial spaces
  • Main applications: Building wall

In IGOODS's line stone and natural texture, White South Island age marks flexible stone is a style in the "clean color and enduring appeal" direction. It has a strong sense of linear order, suitable for surfaces where the wall should be read with rhythm and direction; when applied to actual wall surfaces, it looks clean as a large-area base, does not grow tiresome, and more easily sets off lighting and furnishings.

Flexible stone is a type of veneer material used more often in recent years in commercial fit-outs and exterior walls. Names vary by region: soft stone, flexible stone, flexible stone-look panels, and bendable stone basically refer to the same type of product.

Actual photographed texture characteristics of NanDaoSuiYueHen

In the real photo, the surface of White South Island Time Traces Flexible Stone appears in a light white tone, clean and bright. Its texture is characterized by "vertical linear texture and natural time traces, with fine texture and soft light-dark transitions." The color blocks transition gradually rather than being joined with hard edges, so when installed over large areas, a "patchy" look is unlikely to appear.

Light has a fairly obvious effect on this color: under natural side light, the light-colored portions show undulating layers, while under artificial downlights or light strips they appear more even. This also means the same material can be used for an entire feature wall or just a local accent wall.

Under the same series, multiple colors and textures can be combined, making it easy to distinguish main walls from transition walls within the same space, and easier to maintain consistency during large-area installation.

Specifications and packaging parameters

Specifications (mm)Thickness (mm)Approx. weight per panel (kg)Wooden crate packaging (pieces/crate)Area of wooden crate after packaging (㎡)Dimensions after packaging W×L×H (mm)Weight after packaging approx. (kg)
600×12003.5-6.56.8120123.2670×1300×900780
1200×24003.5-6.52745123.21280×2480×5001150

Optional colors: Black, white (other colors can be customized)

Packaging notes: Bulk goods are shipped in wooden crates, making loading/unloading and stacking more stable; for export, export wooden crates are recommended to improve compression resistance and moisture protection for long-distance transport. Specification data are subject to order confirmation.

Customization notes: The customization scope covers four items: size, color, texture direction and thickness; after the project party provides layout drawings or renderings, the factory can confirm the achievable specifications.

Material and performance parameters

The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The material system is inorganic mineral raw materials plus a polymer flexible substrate, containing no asbestos and no heavy metals, and can be used in indoor spaces with air quality requirements. The material is light, thin, and flexible, can be bent, and is not prone to cracking or deformation; it also has comprehensive performance of flame retardancy, moisture resistance, stain resistance, and UV resistance.

ProjectParameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemTexture direction, color, texture, thickness, specifications and dimensions, and packaging method
Sample specificationsPhysical samples can be provided for design material selection and texture confirmation

The above are the general performance ranges for flexible stone as a category of material. For the acceptance of white South Island Time Traces flexible stone in a specific project, the valid test reports for the selected model, the provisions of the supply contract, and the relevant standards of the project location shall govern.

Key installation and construction points

This material has relatively relaxed requirements for construction conditions: no keel or complex substrate is needed, and after leveling it can be installed on the wall, either dry-bonded or wet-bonded.

Substrate treatment

Substrate conditions directly determine the final bonding effect, so the substrate acceptance step cannot be skipped: moisture content, flatness and strength must all pass. When the substrate does not meet the standard, it is better to repair first than to install panels directly.

Measurement and layout

During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.

Cutting and hole drilling

Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.

Pasting installation

Both dry-bonding and wet-bonding processes are compatible. Use a dedicated adhesive for flexible stone, apply with the full-surface bonding method, spread evenly with a notched trowel, and press firmly after installation to ensure there are no obvious voids between the back of the board and the substrate. For outdoor facade construction, a weather-resistant adhesive suitable for the external environment must be used.

Compaction and adjustment

After each piece of material is installed on the wall, press it firmly with a roller or soft pad, and check whether the edges and corners are lifting. If a position deviation is found, adjust it as soon as possible; once the adhesive begins to set, it should not be moved again. Where the wall surface is uneven, the pressing time can be appropriately increased.

Edge finishing and acceptance

Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.

Which commercial spaces is white South Island age marks flexible stone suitable for?

The following explains, by project type, where it is suitable and the main reasons for choosing it.

Hotel guest rooms and elevator lobbies

Walls on guest room floors and elevator lobbies are replaced infrequently, so materials need to withstand long-term use. Flexible stone is scrub-resistant and not prone to marks, and daily cleaning requires no extra process, which is relatively friendly to hotel operations.

Homestay guest rooms and public areas

Vacation-oriented spaces emphasize a sense of relaxation and handmade traces, and the randomness of this type of texture fits the "unforced" spatial character perfectly.

Clubhouses and reception spaces

Clubhouse walls usually carry the role of creating atmosphere, with higher demands on material texture and feel than on pattern. This type of texture has layering under side light and is suitable for use with wall-washing lights.

Commercial storefronts and street blocks

Retail and street-block project interfaces must attract attention while withstanding long-term use. These material surfaces are stain-resistant and fade-resistant, suitable for storefront interiors, main in-store walls, and pedestrian circulation areas.

What product features does white South Island age marks flexible stone have?

  • Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
  • Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
  • No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
  • Complete specifications: Conventional specifications are relatively complete, so sizes can be selected directly according to the wall layout, shortening on-site cutting and panel matching time.
  • Texture customizable: Stone texture direction can be customized to marble vein, granite vein, cultured stone texture, travertine texture, vintage stone texture, etc.; color, texture, and thickness can all be adjusted according to project requirements.
  • Old walls can be directly covered: Suitable for secondary renovation of existing walls: no need to demolish down to the substrate, which is friendlier for commercial spaces in operation and occupied residences.

Project selection and procurement key points for white South Island age marks flexible stone

The most common problem at the design material selection stage is: the stone texture in the rendering looks great, but after implementation it is distorted due to seams, color differences or shape limitations. The bendable and cuttable characteristics of flexible stone are precisely intended for locations such as curved walls, columns, irregular door headers and shaped curtain walls.

Supports bending to any curvature and covering special-shaped surfaces. Curved walls, columns and special-shaped door heads can be covered in a single piece, reducing the multiple-piece assembly seams that inevitably occur with traditional hard stone at special-shaped positions.

Whether it is a same-city commercial renovation project, a regional municipal engineering project, or cross-border foreign trade and nationwide bulk engineering procurement, flexible stone can cover it all.

What stone-look material to use for irregular wall surfaces, how to construct curved exterior wall stone, and customizable-texture flexible stone are the questions most frequently asked at this stage.

White South Island age marks flexible stone FAQ

What is the typical lead time?

Conventional stock specifications have shorter lead times; custom specifications and large-volume orders need to be confirmed according to production scheduling. For engineering orders, it is recommended to lock specifications and quantities at the drawing stage to avoid waiting on site.

How to confirm whether to choose this one or another color pattern in the same series?

It is advisable to also request physical samples of 2–3 candidate color options, compare them under the lighting conditions of the actual space, and then make a decision in combination with the layout effect over a large area. Looking only at a small sample can easily overlook the rhythm of the overall installed surface.

Can the specifications of white South Island age marks flexible stone be customized?

Yes. In addition to conventional stock specifications, flexible stone supports customization of large panels and extra-long panels, and can also be grooved according to drawings and cut on site. Lead times and minimum order quantities for custom specifications need to be confirmed separately according to the specific dimensions.

Does a difference in thickness lead to different usage scenarios?

There is a difference. Thinner specifications are more suitable for interior walls and shaped cladding, while thicker specifications have more margin on exterior facades and in locations with higher impact resistance requirements. When selecting, it is recommended to judge together with the substrate conditions and usage environment.

About IGOODS

IGOODS takes flexible stone and wood veneer wall panels as its core product systems, using natural mineral raw materials composited with polymer flexible substrates, belonging to inorganic ecological materials, zero formaldehyde, meeting the environmental standards for home decoration, commercial decoration, outdoor engineering and foreign trade export.

The company positions itself as a wall space material solution provider rather than a mere panel supplier, and can provide material selection, physical samples, design coordination and engineering project support for architectural designers, decoration companies, engineering clients and building materials channel clients. Foreign trade orders can be supplied on a one-stop basis, and it has long undertaken overseas exterior wall decoration, building renovation and landscape landscaping needs.

Indoor and outdoor, new build and renovation, commercial and municipal—flexible stone has corresponding case types across these dimensions. From sampling to bulk delivery, the factory coordinates directly and can issue test reports and qualification documents; for engineering projects, layout and on-site technical support are provided, with after-sales follow-up by the technical team.

White South Island age marks flexible stone · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Interior and exterior building wall decoration (not applicable to ground paving)
Product standards
JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model

Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied