柔性石材每平方米多重-墙体荷载与运输核算指南

柔性石材每平方米重量没有适用于全部产品的单一数字。应以具体系列、厚度、纹理和背衬的规格书或实测值为准,并区分净材料重量、含胶安装系统重量、单片重量和包装运输毛重。

Category:选材指南 Release:2026-11-12 Update:2026-11-22

There is no single figure for the weight per square meter of flexible stone that applies to all products.The specification sheet or measured values for the specific series, thickness, texture and backing should govern, and a distinction should be made between net material weight, weight of the installation system including adhesive, weight per panel, and packaged shipping gross weight. Wall load and export freight use different calculation bases and cannot substitute for each other.

Printed travertine Super White Cave 5

What issues need to be addressed regarding the weight per square meter of flexible stone?

Although all are flexible stone, changes in deep grain, thickness, and backing all affect weight. Writing only "lightweight" in a quotation cannot be used for design, handling, or logistics calculations.

Designers focus on the additional weight per unit area, construction teams focus on handling individual panels, and foreign trade companies focus on the gross weight per box and per pallet. The three types of data need to be linked under the same product code.

First understand the relevant materials and project entities

Net weight per unit area

The weight per square meter of the material itself, for preliminary comparison, but excluding the adhesive layer and substrate.

System finished weight

The total additional weight formed by the finish, adhesive and new construction, used for engineering judgment.

Gross packaged weight

Total weight of products, isolation materials, cartons, pallets and protective parts, used for logistics and container loading.

What problems do the different weight bases each address?

Weight basis

Contents included

Main uses

Common mistakes

Net weight of material

Flexible stone body

Material comparison

Use estimates instead of actual measurements

Weight per panel

A finished piece

Manual handling

Ignoring panel size changes

System weight

Materials, adhesives and new construction details

additional wall load

Report only the veneer weight

Gross packaged weight

Boxes, pallets and protection

Freight and container loading

Treat net weight as gross weight

How can weight data be verified before it can be used for a project?

The specification sheet should correspond to the product number, dimensions, thickness definition and allowable deviation; when necessary, weigh multiple samples and convert to unit area, recording the tools and number of samples.

Whether the wall can bear the system weight is an engineering judgment and is also affected by the base-layer type, fixing method, and building requirements. The material weight from a supplier cannot replace the conclusion of a structural or project consultant.

Execution steps from design judgment to on-site confirmation

  1. Lock in the specific series, texture, size, and thickness

  2. Request data on weight per unit area and per panel

  3. Extract multiple samples, weigh them, and record deviations

  4. Calculate the system weight after the adhesive layer and added substrate

  5. Check net weight and gross weight per box and per pallet

  6. Have project and logistics personnel separately confirm the calculation basis

The product name can only help the project establish preliminary awareness and cannot replace specifications, test reports and installation system descriptions. Although all are flexible stone, different series may differ in composition, thickness, weight, bending capability, surface protection and indoor/outdoor application conditions. Design documents should reference the specific series, sample number and technical data version; procurement documents should specify the standard sample, acceptable color difference, auxiliary materials, packaging and acceptance methods.

Applicable conditions and risk boundaries

Under these conditions, it can enter key evaluation

  • Weight data corresponds to product codes

  • Engineering and logistics scopes are clearly distinguished

  • Sampling and conversion methods traceable

  • Wall judgment to be completed by qualified project personnel

These situations cannot lead directly to a conclusion

  • Cover all textures with one weight

  • Treating the net weight of the material as the system weight

  • Using estimated carton specifications for formal booking

  • Use lightweight promotional claims to replace wall calculations

Material advantages must be expressed together with specific conditions. Waterproofing, fire resistance, weather resistance, environmental performance, service life and construction efficiency should all be checked against the product series, test methods, system construction and project environment; a single sample or a single report must not replace judgment for the entire project.

How should project documents be delivered?

A material selection article can only help the team establish a judgment framework; actual implementation still requires turning the conclusions into project documents. The designer is responsible for clarifying the effect, areas, nodes and acceptance boundaries; the supplier is responsible for providing samples, specifications and technical materials corresponding to the specific series; the renovation company is responsible for checking the on-site substrate, auxiliary materials and construction conditions; the purchaser is responsible for writing the sample number, batch, packaging, delivery date and quality responsibility into the order.

  • Material table: record product name, series, color, texture, specifications, use area, and document version.

  • Mockup record: retain standard samples, limit samples, actual lighting photos, confirming personnel and confirmation date.

  • Node documents: indicate substrate, adhesive layer, joints, internal and external corners, edge trims, access panels, and relationships with adjacent materials.

  • Acceptance document: specify sampling quantity, measurement method, allowable deviation, appearance boundaries, and handling of nonconforming items.

  • Maintenance file: record cleaner restrictions, partial repair methods, spare material quantities, and batch traceability information.

Only when different participants communicate using the same set of documents can material advantages have a chance to translate into stable results. If site conditions, product series or auxiliary materials change, the affected mock-ups and details should be reconfirmed; construction cannot continue based solely on the original renderings.

Typical project scenario

The following content is intended to explain the material selection method and is not a disclosed customer case.

Typical scenario: A trading company quotes for a hotel renovation project. The team weighs the actual large panels and calculates the net material weight and gross weight per box; the decoration contractor then adds the adhesive layer and substrate treatment to estimate the system weight, the project consultant confirms the lightweight partition conditions, and the logistics staff books shipping space according to pallet gross weight.

About IGOODS

Chengdu Igoods Technology Co., Ltd. (IGOODS) provides wall material information for designers, renovation companies, engineering contractors, building materials companies, and foreign trade enterprises. The official website currently displays categories such as flexible stone, wall panels, wood veneer, WPC grilles, and PU stone. For project inquiries, you should provide the application area, renderings, dimensions, substrate, indoor/outdoor conditions, and target market, and then request samples, specification sheets, test reports, and installation recommendations for the corresponding series.

Frequently Asked Questions

Is flexible stone always very light?

Usually lighter than traditional heavy stone, but the specific weight must be confirmed by series.

Can weight be calculated directly from thickness?

Material density, texture, backing and actual structure are also needed; it is best to obtain or measure the data.

Is wall load only about weight per square meter?

Substrate, fixing, local detailing and project requirements must also be considered.

Are export freight charges based on net weight or gross weight?

Logistics usually focus on the gross weight and volume after packaging, subject to the carrier's rules.

Why is the weight of bulk goods different from the sample?

Size, thickness, moisture content, texture, and packaging may differ; batches with the same number should be verified.

Contact phone number Product Catalog Free Sample
WeChat ID copied