How to close the阴阳angle of flexible stone - Construction node and acceptance guide

According to the product thickness, texture起伏, allowable bending radius, base accuracy and collision risk, choose from bending package angle, splicing, leaving a gap or metal edge. It is necessary to make a node sample before construction and confirm the cutting edge, adhesive layer, color repair and the finished surface of adjacent materials.

Category:Industry Knowledge Release:2026-11-12 Update:2026-11-22

There is no universal method for terminating internal and external corners of flexible stone.The choice among bent corner wrapping, butt jointing, leaving a gap or metal edge trim should be based on product thickness, texture relief, allowable bending radius, substrate precision and risk of impact. A detail mock-up must be made before construction, and the cut edges, adhesive layer, color repair and finished surface with adjacent materials must be confirmed.

What problems need to be solved for how to terminate internal and external corners of flexible stone?

Internal and external corners are where walls most easily expose material thickness, substrate errors and workmanship. Especially under wall-washing lights, non-straight edges, lifted edges and adhesive contamination are magnified.

External corners also carry impact risk; restaurant carts, hotel luggage and commercial cleaning equipment all affect the detailing. Visual continuity and maintainability need to be considered together.

Printed travertine Super White Cave 2

First understand the relevant materials and project entities

Folded corner wrapping

Running the material continuously around corners reduces face seams, but the grain, radius and resilience must be verified.

Butt jointing or joint reservation

The two pieces of material form a controlled boundary at the corner, which makes it easier to control panel size, but places high demands on cutting and joint-filling precision.

Finished product edge trim

Protect edges with metal or other profiles and form clear lines; color, width, and finished surface need to be coordinated.

How to choose common internal and external corner methods?

Node method

Applicable conditions

Advantages

Key inspection points

Continuous corner wrapping

Radius and texture allowance

Visual continuity

Rebound, cracking, edge lines

IV. Forty-five degrees or butt-jointed

The material can be precisely processed

Clear corner lines

Cut edges, adhesive joints, chipped edges

Joint treatment

The design accepts clearly defined joints

Accommodate a certain tolerance

Joint width, color, consistency

Metal edge trim

High-impact or material transition areas

Protect edges, easy to define

Profile fixing and color difference

Why shouldn't external corners pursue only visual seamlessness?

Visual seamlessness may require a smaller bending radius, but this increases the risk of surface cracking, springback, or hollowing. High-impact areas also require replaceable or impact-resistant construction.

Internal corners easily accumulate adhesive, trap dirt or form non-straight vertical lines. The substrate should first be squared and straightened, then adhesive quantity, cutting and compaction controlled according to the sample.

Execution steps from design judgment to on-site confirmation

  1. Check material series, thickness and texture direction

  2. Check corner verticality and substrate strength

  3. Choose corner wrapping, butt jointing, leaving seams, or profile solutions

  4. Produce no fewer than one complete detail mock-up

  5. Confirm adhesive, cutting, and surface repair

  6. Construct according to the mock-up and accept section by section

The product name can only help the project establish preliminary awareness and cannot replace specifications, test reports and installation system descriptions. Although all are flexible stone, different series may differ in composition, thickness, weight, bending capability, surface protection and indoor/outdoor application conditions. Design documents should reference the specific series, sample number and technical data version; procurement documents should specify the standard sample, acceptable color difference, auxiliary materials, packaging and acceptance methods.

Applicable conditions and risk boundaries

Under these conditions, it can enter key evaluation

  • Node details have been incorporated into the shop drawings

  • The actual material has completed bending or cutting tests

  • External corner impact rating has been assessed

  • The finished surfaces of adjacent materials are already coordinated

These situations cannot lead directly to a conclusion

  • Decide the closure on site on an ad hoc basis

  • Forced small-radius bending

  • Use thick adhesive to compensate for severe substrate errors

  • Metal strips without reserved fixing and expansion allowance

Material advantages must be expressed together with specific conditions. Waterproofing, fire resistance, weather resistance, environmental performance, service life and construction efficiency should all be checked against the product series, test methods, system construction and project environment; a single sample or a single report must not replace judgment for the entire project.

How should project documents be delivered?

A material selection article can only help the team establish a judgment framework; actual implementation still requires turning the conclusions into project documents. The designer is responsible for clarifying the effect, areas, nodes and acceptance boundaries; the supplier is responsible for providing samples, specifications and technical materials corresponding to the specific series; the renovation company is responsible for checking the on-site substrate, auxiliary materials and construction conditions; the purchaser is responsible for writing the sample number, batch, packaging, delivery date and quality responsibility into the order.

  • Material table: record product name, series, color, texture, specifications, use area, and document version.

  • Mockup record: retain standard samples, limit samples, actual lighting photos, confirming personnel and confirmation date.

  • Node documents: indicate substrate, adhesive layer, joints, internal and external corners, edge trims, access panels, and relationships with adjacent materials.

  • Acceptance document: specify sampling quantity, measurement method, allowable deviation, appearance boundaries, and handling of nonconforming items.

  • Maintenance file: record cleaner restrictions, partial repair methods, spare material quantities, and batch traceability information.

Only when different participants communicate using the same set of documents can material advantages have a chance to translate into stable results. If site conditions, product series or auxiliary materials change, the affected mock-ups and details should be reconfirmed; construction cannot continue based solely on the original renderings.

Typical project scenario

The following content is intended to explain the material selection method and is not a disclosed customer case.

Typical scenario: The hotel corridor wall includes door opening external corners and niche internal corners. The decoration company compares continuous corner wrapping and metal trim in the sample section, changes low-level impact-prone external corners to replaceable profiles, and ensures the edge lines of the niche through controlled gaps.

About IGOODS

Chengdu Igoods Technology Co., Ltd. (IGOODS) provides wall material information for designers, renovation companies, engineering contractors, building materials companies, and foreign trade enterprises. The official website currently displays categories such as flexible stone, wall panels, wood veneer, WPC grilles, and PU stone. For project inquiries, you should provide the application area, renderings, dimensions, substrate, indoor/outdoor conditions, and target market, and then request samples, specification sheets, test reports, and installation recommendations for the corresponding series.

Frequently Asked Questions

Can the external corner of flexible stone be folded directly?

Requires trial work based on specific product, texture and radius; cannot be generalized.

Must metal strips be used for external corners?

Not necessarily; it is more worth evaluating in high-collision areas or at material junctions.

How to avoid adhesive marks at internal corners?

Control the substrate, adhesive quantity and compaction sequence, and determine the cleaning method in the mock-up.

Should edge trim be installed first or later?

Depends on the profile system and nodes; it should be determined according to the detailed drawings and manufacturer recommendations.

Which locations are mainly checked during acceptance?

Check corner lines, edge lifting, seams, contamination, color difference, and the relationship of finished surfaces.

Related reading

Contact phone number Product Catalog Free Sample
WeChat ID copied