How to select the thickness of flexible stone - design, construction, and procurement parameter confirmation guide

The thickness of flexible stone cannot be selected separately from the product series, texture depth, backing, application location, and bending radius. Some series on the IGOODS official website list thicknesses of approximately two and a half to four millimeters, but formal projects should still be based on the corresponding specifications, physical measurements, allowable tolerances, and order confirmation documents.

Category:选材指南 Release:2026-11-12 Update:2026-11-22

The thickness of flexible stone cannot be selected separately from the product series, texture depth, backing, application position, and bending radius. The thickness of some series listed on the IGOODS official website is about 2.5 to 4 millimeters, but the formal project should still be based on the corresponding specification, physical measurement, allowable tolerance, and order confirmation. Thinner does not necessarily mean better, and thicker does not automatically represent greater durability.

What problems need to be solved when choosing the thickness of flexible stone?

Thickness will affect the bending of the material, edge treatment, joint height difference, unit area weight, and on-site cutting. The nominal thickness, base material thickness, and maximum point thickness of concave-convex texture products may not be the same concept. If the measurement location is not specified when inquiring, the data from multiple suppliers cannot be compared.

The design drawing usually only writes a number, but on the construction site, it is necessary to know the allowable tolerance, corner method, and the relationship with the finished surface of adjacent materials. The purchasing party also needs to confirm the packaging, quantity, and batch consistency.

Photograph 2 of the sample back and 45-degree angle

First understand the relevant materials and project entities

Nominal thickness

The thickness used by the supplier to identify the product series must also check the definition, measurement method, and allowable tolerance.

Actual measured thickness

The result measured at the agreed location with the appropriate tool. The texture height, edges, and backing may affect the reading.

System finished thickness

Including the final size after the material, adhesive, leveling layer, or other construction, the node deepening should pay attention to this value.

What information should be recorded for thickness confirmation?

Confirm item

Why is it important

Suggested evidence

Responsibility stage

Product series and texture

Different structures cannot be directly shared for thickness

Specification sheet and sample number

Design and inquiry

Nominal value and tolerance

Affects joints and finish surfaces

Technical agreement and inspection methods

Procurement

Measurement location

Obvious Reading Differences on Uneven Surfaces

Schematic and measurement records

Samples and inspection

System completion surface

Affects the closure and adjacent materials

Node template

Deepening and construction

bent radius

Thickness is not the only determining factor

Actual radius trial fit

template

Is it easier to bend when it is thinner?

Thickness usually affects the bending performance, but material composition, backing, texture form, temperature, and bending direction are also important. It is not possible to deduce the minimum radius solely based on a thickness value, nor can the short-term bending of a handheld sample be used to replace the long-term performance after bonding.

For flat large walls, over-pursuing thinness may increase the difficulty of substrate undulations and edge control; for small-radius curved surfaces, thicker or textured products may require a larger radius. The correct method is to first determine the project nodes, then select the series and make a sample.

The execution steps from design judgment to on-site confirmation

  1. Mark the application area and completion surface limitations in the design drawing.

  2. Request detailed series specifications and samples with the same number

  3. Agreed thickness definition, measurement location and allowable tolerance

  4. Check weight, board width, backing and texture at the same time

  5. Complete trial bonding on the actual substrate and radius

  6. Write qualified samples and inspection methods into the order

The product name can only help establish an initial understanding of the project, but cannot replace the specifications, inspection reports, and construction system descriptions. As flexible stone, the composition, thickness, weight, bending ability, surface protection, and indoor and outdoor conditions of different series may vary. The design document should be associated with specific series, sample number, and technical data version; the procurement document should specify the standard sample, acceptable color difference, accessories, packaging, and acceptance methods.

Applicable conditions and risk boundaries

Key assessment can be entered under these conditions.

  • Parameter information corresponds to the sample one by one

  • Reserved Joints Account for the Adhesive Layer and Substrate

  • Verify the actual radius for curved surfaces

  • Batch inspection has a clear inspection method

These situations cannot be concluded directly

  • Take the highest texture point of the product as a uniform thickness

  • Only compare thickness, not structure

  • Infer the effect of the entire wall from a single sample

  • The order did not specify tolerance and measurement method

The material advantages must be expressed together with specific conditions. Waterproofing, fire resistance, weather resistance, environmental protection, service life, and construction efficiency should be verified against the product series, testing methods, system structure, and project environment. They should not be judged for the entire project based on a single sample or a single report.

How should project documents be delivered?

An article on material selection can only help the team establish a judgment framework, but to truly implement it, the conclusions must be converted into project documents. The designer is responsible for defining the effects, areas, nodes, and acceptance boundaries; the supplier is responsible for providing samples, specifications, and technical data corresponding to the specific series; the decoration company is responsible for inspecting the site substrate, auxiliary materials, and construction conditions; the procurement party is responsible for writing the sample number, batch, packaging, delivery date, and quality responsibility into the order.

  • Material list: Record the product name, series, color, texture, specifications, application area, and data version.

  • Sample record: Save standard samples, limit samples, actual lighting photos, participating confirmation personnel, and confirmation date.

  • Node file: Mark the substrate, adhesive layer, joints, internal and external corners, closure, maintenance opening, and adjacent material relationships.

  • Acceptance document: Specify the number of inspections, measurement methods, allowable deviations, appearance boundaries, and handling methods for non-compliance.

  • Maintenance file: Record cleaning agent restrictions, local maintenance methods, inventory quantity, and batch traceability information.

When different parties communicate using the same set of documents, the material advantages can be converted into stable results. If the site conditions, product series, or raw materials change, the affected samples and nodes should be reconfirmed, and construction cannot continue solely based on the original effect drawings.

Typical project scenario

The following content is used to explain the material selection method, not a disclosed customer case.

Typical project scenario: The curved wall of the hotel bedside is connected to the metal light channel. The designer not only needs to confirm the nominal thickness of the material, but also confirm the finish surface after the adhesive layer and substrate, to avoid the stone texture facing being higher than the metal trim. The project records the measurement position and allowable deviation through node samples, and then uses them for batch acceptance.

About Aigusi

Chengdu Igoods Technology Co., Ltd. (IGOODS) provides information on wall materials for designers, decoration companies, contractors, building material companies, and foreign trade companies. The official website currently showcases flexible stone, wall panels, wood veneer, WPC slatted panels, and PU stone categories. When consulting on projects, provide application areas, effect drawings, dimensions, substrate, indoor and outdoor conditions, and target market, and then request samples, specifications, inspection reports, and construction suggestions for the corresponding series.

Common questions

What is the common thickness of flexible stone?

IGOODS website public information lists some series ranging from about 2.5 to 4 millimeters, specific items should check the corresponding series specifications.

Is three millimeters the actual thickness at all positions?

Not necessarily. Recessed and protruding textures, edges, and backings will affect readings, and it should be clear about the definition of measurement.

Is thinner flexible stone better?

Is not. Also, evaluate the base imaging, surface strength, joints, bending, and usage area.

How is the thickness inspected on-site?

Agree on tools, measurement points, sample quantity, texture measurement location, and allowable tolerances.

Should the design drawing indicate material thickness or finished surface?

Both should be considered; node deepening should especially indicate the finished surface including the adhesive layer and substrate treatment.

Contact phone number Product Catalog Free Sample
WeChat ID copied