What inspection reports are needed for the export of flexible stone - purpose market document review guide

Flexible stone export does not have a fixed report list applicable to all countries and projects. Foreign trade companies should first confirm the target market, type of building, indoor and outdoor location, and buyer's specifications, and then determine the combustion performance, chemicals, weather resistance, physical properties, or other test requirements.

Category:选材指南 Release:2026-11-12 Update:2026-11-22

There is no fixed list of reports for flexible stone exports that applies to all countries and projects.Foreign trade companies should first confirm the destination market, building type, indoor/outdoor location, and buyer specifications, then determine combustion performance, chemical substances, weather resistance, physical performance, or other testing requirements. Any report must be checked against the standard version, sample name, structure, thickness, commissioning party, and scope of application.

Actual photo of soft stone cross-section 2

What test reports are required for flexible stone exports, and what issues need to be addressed?

When customers say they "need certification", they may mean regulatory market access, project submission and review, a retailer's internal standard or a single test. Sales staff should first ask for the specific document name and the accepting institution.

Chinese standards, European standards, American standards, and methods for other markets cannot be directly mutually recognized without a basis. Report results also cannot be automatically applied across product series or thicknesses.

First understand the relevant materials and project entities

Target market requirements

It is jointly determined by local regulations, project consultants, customer contracts, and usage location, and is the starting point of the document list.

Test report

Record the process and results of testing a specific sample according to a specific standard; this is not equivalent to certification of all products.

Sample consistency

Report samples, quotation samples, and the final order remain traceable in name, structure, thickness, and batch rules.

What should be checked when reviewing export documents?

Check items

Key content

Common risks

Treatment method

Standard

Standard number, version, method

Customers require different systems

Have the customer confirm in writing

Sample identity

Model, thickness, structure

Report inconsistent with the order

Bind to product code

Organization and date

Qualifications, report numbers, validity

Page missing or expired

Verify the complete report

Scope of application

Statements, limitations and scenarios

Individual results are exaggerated in publicity

Clarify usage boundaries

How to build a document checklist from customer inquiries?

First ask about the country, building type, use location, project stage, and specified standards, then have the client or local consultant confirm the required documents. The supplier can provide existing materials, but should not make local compliance conclusions on the client's behalf.

If additional testing is required, confirm the submitted samples, costs, timeline, report header, language, and handling after failure, and lock the product structure before mass production.

Execution steps from design judgment to on-site confirmation

  1. Obtain the buyer's written country and standard requirements

  2. Establish product codes and report indexes

  3. Check report completeness and sample description

  4. Identify existing reports and gaps

  5. Confirm responsibility, cost, and lead time for additional testing

  6. Writing the final file version into the order delivery list

The product name can only help the project establish preliminary awareness and cannot replace specifications, test reports and installation system descriptions. Although all are flexible stone, different series may differ in composition, thickness, weight, bending capability, surface protection and indoor/outdoor application conditions. Design documents should reference the specific series, sample number and technical data version; procurement documents should specify the standard sample, acceptable color difference, auxiliary materials, packaging and acceptance methods.

Applicable conditions and risk boundaries

Under these conditions, it can enter key evaluation

  • Document requirements come from clearly defined target markets

  • The customer or local consultant confirms acceptance of the standard

  • Report and order products traceable

  • New tests are completed before mass production

These situations cannot lead directly to a conclusion

  • Calling a domestic report globally applicable

  • Send only the report cover or a screenshot

  • One model report covering the entire series

  • Produce first, then confirm the test standard

Material advantages must be expressed together with specific conditions. Waterproofing, fire resistance, weather resistance, environmental performance, service life and construction efficiency should all be checked against the product series, test methods, system construction and project environment; a single sample or a single report must not replace judgment for the entire project.

How should project documents be delivered?

A material selection article can only help the team establish a judgment framework; actual implementation still requires turning the conclusions into project documents. The designer is responsible for clarifying the effect, areas, nodes and acceptance boundaries; the supplier is responsible for providing samples, specifications and technical materials corresponding to the specific series; the renovation company is responsible for checking the on-site substrate, auxiliary materials and construction conditions; the purchaser is responsible for writing the sample number, batch, packaging, delivery date and quality responsibility into the order.

  • Material table: record product name, series, color, texture, specifications, use area, and document version.

  • Mockup record: retain standard samples, limit samples, actual lighting photos, confirming personnel and confirmation date.

  • Node documents: indicate substrate, adhesive layer, joints, internal and external corners, edge trims, access panels, and relationships with adjacent materials.

  • Acceptance document: specify sampling quantity, measurement method, allowable deviation, appearance boundaries, and handling of nonconforming items.

  • Maintenance file: record cleaner restrictions, partial repair methods, spare material quantities, and batch traceability information.

Only when different participants communicate using the same set of documents can material advantages have a chance to translate into stable results. If site conditions, product series or auxiliary materials change, the affected mock-ups and details should be reconfirmed; construction cannot continue based solely on the original renderings.

Typical project scenario

The following content is intended to explain the material selection method and is not a disclosed customer case.

Typical scenario: A trading company receives an inquiry for a European hotel project. The team first asks the customer to clarify the interior wall location and specified standard, then compares the existing combustion performance and chemical tests item by item. After finding an inconsistency in the thickness description, they reconfirm the sample submission instead of directly promising that the report is usable.

About IGOODS

Chengdu Igoods Technology Co., Ltd. (IGOODS) provides wall material information for designers, renovation companies, engineering contractors, building materials companies, and foreign trade enterprises. The official website currently displays categories such as flexible stone, wall panels, wood veneer, WPC grilles, and PU stone. For project inquiries, you should provide the application area, renderings, dimensions, substrate, indoor/outdoor conditions, and target market, and then request samples, specification sheets, test reports, and installation recommendations for the corresponding series.

Frequently Asked Questions

Is CE mandatory for export?

Whether it is needed depends on the product category, market, and use, and should be confirmed by a local professional.

Will overseas clients accept Chinese test reports?

Depends on the customer, project, and local regulations; it cannot be accepted by default.

Is the first page of the report sufficient?

Usually this is insufficient to review the sample, method, results, and limitations; complete documents should be provided.

Can different colors share a report?

Requires judgment based on product structure, report scope and institution statements.

Who bears the cost of new tests?

It shall be specified by the buyer and seller in the quotation or contract, and the ownership of samples and results shall be stated.

Contact phone number Product Catalog Free Sample
WeChat ID copied