餐饮门头260㎡红色夯土板墙面施工案例
艾谷思IGOODS 为四川省遂宁市一处餐饮门头项目提供红色夯土板作为墙面材料,采用满粘法直接上墙、无需龙骨基层。项目墙面概算约 260㎡,材料规格 1220×2930mm、厚度 2.5–3.5mm、单片重量约 17kg,执行 JG/T 540-2017《建筑用柔性仿石饰面材料》。
IGOODS provided for a dining storefront project in Suining City, Sichuan Province, Dining entrance facade project provided by Red Rammed earth board as a wall material, applied directly to the wall with the full-adhesion method, with no need for a keel substrate. The project wall budget is about 260㎡, material specifications 1220×2930mm, thickness 2.5–3.5mm, the weight of a single piece is about 17kg; implement JG/T 540-2017 "Flexible Stone-like Facing Materials for Buildings". The application images in this case total 8 pieces.
- 1220×2930mm Panel specifications
- 2.5–3.5mm thickness
- Approx. 3.2 kg/㎡ Surface weight (converted at 17kg/piece)
- Approx. 260 ㎡ Wall area (◆budget estimate)
- 8 pieces Application image
- JG/T 540-2017 Implementation standards
Project file
| Project item | Content |
|---|---|
| Project type | Dining entrance facade |
| Application location | Facade main wall / storefront sign background, door frame / facade edge wrapping, display window side wall / glass junction, canopy lower edge / eave |
| Materials used | Red Rammed Earth Board (Rammed earth and cement) |
| Material specifications | 1220×2930mm, thickness 2.5–3.5mm, single piece about 17kg |
| Construction process | Full bonding method, direct wall installation after leveling, no keel required |
| Implementation standards | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' |
| Project location | Suining City, Sichuan Province |
| Wall area | Approx. 260 ㎡ (◆ budget estimate) |
| Actual photo record | 8 pieces (on-site shooting) |
Regarding the scope of this page: The material specifications, performance parameters, and applicable standards in this article all come from IGOODS product documentation and can be verified item by item. ★Project experience = Common industry practices and experience range, not as a reference for national standards data; ◆Estimate = Estimated value calculated based on the industry's common scale and the scale of this case, used to judge the scale,Not an actual measured bill; actual conditions are subject to project confirmation.
1. Customer industry usage scenario: the real wall requirements of a restaurant storefront
- Outdoor weather resistance is the first hurdle The storefront is exposed to sun and rain for the long term, UV resistance, high and low temperature resistance, and weathering resistance are prerequisites; weather-resistant adhesive must be used for bonding; using indoor adhesive outdoors will cause delamination due to aging.
- Edge waterproofing is more critical than the material itself If water enters at the junction of the upper edge and sides of the facade with the canopy and cannot drain away, water will seep back along the edge trim into the substrate, manifesting as local bulging of the finish. Waterproof edge finishing is the key process in storefront construction.
- Shop signs and illuminated letters have high requirements for flatness Light boxes, illuminated letters and signs must be fixed to the wall surface, substrate flatness directly determines whether the gap between the lettering and the wall is even and straight. If the storefront is uneven, the letters will be crooked when installed.
- For nighttime exterior lighting, a matte surface is required At night the facade relies on light boxes and external lighting for illumination. High-gloss surface materials will reflect the light into a patch of glare, covers the texture and also covers the text; only a matte textured surface can absorb light and retain layering.
- The renovation schedule is extremely short; only closed hours can be used The storefront portion of a store renovation can often only be completed between closing time and the next day's opening, the material must be able to go up on the wall in one pass, ready to use immediately after application, there must be no wet work requiring curing.
- The facade and interior should be continuous The facade and interior usually use the same material or the same color family to create visual continuity from outdoor to indoor. This requires the storefront and interior walls to use the same batch; otherwise a color difference will be visible as soon as one enters.
II. Material comparison: why red rammed earth panels
Why choose red rammed earth
Using the same red rammed earth panel for the facade and interior is the most core decision of this project. The storefront is the outdoor interface and must withstand sun and rain; the interior must carry the high-temperature visual character of a hot pot restaurant.——A material that meets both sides at the same time, relying on the matte rough texture of the rammed earth and the tolerance of the red color itself: not visible when dirty, not cheap when old.
New South Red is not true red; it leans ochre and earthy, with saturation one level lower than the vermilion commonly used in hot pot restaurants. The advantage of this color level is it does not look harsh when spread over a large area: when light hits it, it is a red with depth, not a glossy sheet.
Rammed earth and cement offers New South Red, ochre red, earth orange and other colors, with the rest customizable; the visual tone of this case is based on New South Red tone as the base tone.
2.2 Material performance parameters
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant;The specific grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The panel has a certain flexibility and can be bent into an arc within a certain radius;The specific radius shall be subject to the model and substrate conditions. |
| Bonding method | Full-bed adhesion is recommended for installation; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, wipe with water or a neutral cleaner. |
| Implementation standards | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' |
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area per box (㎡) |
|---|---|---|---|---|
| 1220×2930 | 2.5–3.5 | 17 | 70 | Approx. 250.2 |
The specifications, weights and packaging in the table are reference values; actual values are subject to order confirmation; custom large panels, small panels and special-shaped sizes are supported.
3. Configuration plan
3.1 Allocate materials by spatial function
| Space / Location | Suggested materials | Specifications | Key focus |
|---|---|---|---|
| Facade main wall / storefront sign background | Flexible Stone(weather-resistant) | 1220×2930mm | Outdoor weather resistance, substrate flatness |
| Door casing / storefront edge wrapping | Same as above | Same as above | Edge waterproofing, rounded corners |
| Display window side wall / glass junction | Same as above | Same as above | Weather-resistant adhesive, finishing with glass |
| Lower edge of canopy / eave | Same as above + waterproof edge sealing | Same as above | Smooth drainage, prevention of back seepage |
3.2 Quantity and project schedule estimate
Dosage formula (★engineering experience basis):
Material preparation area = measured net wall area × (1 + loss rate). Loss rate: regular walls 5%–8%; spaces with many corners/openings 10%–15%. Number of wooden crates = material preparation area ÷ 250.2㎡ (rounded up) | Item | Calculation | Result |
|---|---|---|
| Wall area of this project | — | Approx. 260 ㎡ |
| Wastage rate | ★Value by spatial complexity | 10% |
| Material preparation area | 260 × 1.10 | Approx. 286 ㎡ |
| Number of wooden crates | 286 ÷ 250.2 → rounded up | 2 boxes |
Construction period estimate (◆ estimate):
| Stage | Schedule |
|---|---|
| Substrate treatment (knock out hollow areas + leveling + drying) | Substrate treatment usually accounts for about 1/3 of the total construction period |
| Layout setting-out | ★The denser the holes, the greater the layout workload |
| Adhesive mounting on wall | ★2 people can complete 60-100㎡ per day; 260㎡ ÷ 80㎡/day ≈ 3 days |
| Finishing · Cleaning · Acceptance | ★Project experience |
| Total (budget estimate) | Approx. 6 days(range 4–8 days) |
Diameter specification: The table above is an estimate calculated by order of magnitude,Excludes time occupied by material transport and coordination with the client: ; the actual schedule is subject to the construction schedule confirmed after on-site survey.
A practical reminder: Flexible stone is made from natural mineral raw materials,Slight color tone differences may exist between different batches, this is a characteristic of the material itself. For large-area projects, it is recommendedStock the full quantity at one time and mix the layout: ; always use the same batch for the same wall in the same space.
3.3 Material Configuration
| Stage | Materials | Function | Basis |
|---|---|---|---|
| Bonding | Special adhesive,Full adhesion method | Ensure the finish and substrate are fully bonded | Product technical requirements; weather-resistant adhesive for outdoor use |
| Substrate | Leveling materials (selected according to substrate condition) | Provide a flat, dry substrate free of hollowing | Substrate flatness directly affects appearance |
| Close up | Edge trim / metal trim | Treat internal and external corners, door frames, and wall base closures | ★Engineering Experience Practices |
| Cutting | Utility knife / special cutting tool | On-site cutting according to the layout drawing | On-site secondary cutting is standard practice |
IV. Construction process and acceptance control points
Flexible stone belongs toRelatively relaxed requirements for construction conditionsa type of material: no keel or complex substrate is required,Once leveling is complete, it can go on the wall—dry adhesion or wet fixing both work. But this does not mean that the process can be skipped.
Step 1 · Base treatment
Adhesive substrates includeCement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, insulated wall surfacesRequirements:dry, free of floating dust, no hollowing: ; if flatness is insufficient, level first; if moisture content is too high, seal the base first.
★Engineering Experience: The most common problems in existing-building renovation projects are hollowing of the old putty layer, local dampness, and non-straight internal and external corners.Hollowing must be removed; otherwise the finish will fall off along with it.
Step 2 · Measurement and layout
It is advisable to put the layout drawing on paper before starting workMark door and window openings, switches and sockets, and internal and external corner positions, and calculate the space occupied by trim strips in advance.Joint lines on different walls within the same space should be aligned as much as possible, the overall visual impression differs greatly.
Step 3 · Cutting
Cut according to the layout drawing; secondary cutting on site is a conventional practice. Flexible stone panels are thin and flexible, making cutting less difficult than ceramic tile or stone, butAvoid repeatedly bending the same area.
Step 4 · Adhesive application and wall installation (full adhesion method)
RecommendedFull adhesion method: Adhesive should be selected according to the product instructions,Full coatingRather than spot application; after installation on the wall, press firmly and release air to ensure there is no cavity between the finish and the substrate.
Regarding curved arcs: Flexible stone can bend within a certain radius,The specific radius shall be subject to the model and substrate conditions.: ; large-radius curves require a mock-up for confirmation first.
Step 5 · Joints and edge finishing
- Tight-joint: The seam lines are the finest, suitable for regular walls;
- Leave a joint + edge trim: High fault tolerance, suitable for spaces with many corners and cutouts;
- Metal trim: Used for closing edges and emphasizing lines.
Step 6 · Cleaning and self-inspection
Check each wall: hollowing, color difference, straightness of joint lines, squareness of openings, and finishing in place.
Step 7 · Delivery acceptance
| Control points | Standard value or practice | Basis |
|---|---|---|
| Substrate dryness / hollowing | dry, free of floating dust, no hollowing; if not compliant, repair first | ★Engineering Experience Practices |
| Substrate flatness | Leveling in place, repair deficiencies first | ★Engineering Experience Practices |
| Bonding method | Full bonding method, adhesive selected according to product instructions | Product technical requirements |
| Material execution standard | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' | Product execution standard |
| Internal and external corners and closures | Edge trim / metal trim closure, trim straight and true | ★Engineering Experience Practices |
| Cutouts and panels | The cutout position is coaxial with the panel, and the edges are not chipped | ★Engineering Experience Practices |
| Color difference control | Use the same batch of material for the same wall surface in the same space | ★Engineering Experience Practices |
| Joint straightness | Align joint lines within the same space, with no obvious misalignment visually | ★Engineering Experience Practices |
| Environmental protection indicators | No added formaldehyde, no asbestos | Product information (subject to the test report for the model) |
V. Image display and application description
Total application photos of this project 8 pieces; all photographed on site at the project, covering open seating area, private room (round table), storefront entrance, private room (caisson ceiling), open kitchen small material table, dining area, corridor end feature, private room (arched doorway) and other areas.
VI. Communication and confirmation process
For wall projects in dining entrance facade projects, communication mainly revolves around three things: whether the material selection matches the spatial character, how the openings and layout are determined, and whether the substrate conditions are met. The following are the key points of the communication process.
Owner: Ours is a restaurant storefront, and we want the wall to have the texture a restaurant storefront should have. What do you suggest?
IGOODS: It is advisable to clarify three things first: gloss level (matte rather than high-gloss), texture intensity (subtle textures are more enduring), and whether curved shapes are needed. For materials such as red rammed earth panels in the rammed earth and cement category, the performance of the Xinnan Red tone is relatively stable and can be adapted.
Owner: How should cutouts and panel joints be handled?
IGOODS: This must be atLayout stageSolve it. We will first map the positions of door and window openings, switches and sockets, and internal and external corners onto the layout drawing, then determine the seam line direction. Deciding on site will force the seam lines to be disrupted by openings, which is the most common appearance problem.
Owner: What should be noted about the base layer?
IGOODS: the base layer mustdry, free of floating dust, no hollowingHollowing must first be removed and re-leveled—the finish is applied on top, and if the substrate is hollow, the finish will fall off with it; walls with excessively high moisture content must be primed and sealed first.
Owner: Will it be easy to clean later?
IGOODS: The surface is dense; for daily cleaning, just wipe with water or a neutral cleaner. Note: do not use strong solvents, and no sanding is needed.
Owner: To what extent is it dirt-resistant and scratch-resistant?
IGOODS: The specific wear resistance and stain resistance indicators shall be subject to the valid test report of the selected model. The material itself is zero formaldehyde, asbestos-free and flame retardant; these can be verified in the product documentation.
What was confirmed in this communication?
- Selection criteria: Determine the direction of matte, textured, bendable materials rather than high-gloss surface materials;
- Layout prerequisites: Doors and windows, openings, and internal and external corners must be positioned during the layout stage, not decided on site at the last minute;
- Substrate prerequisites: Hollowing must be removed and leveling redone, and wall installation is allowed only after moisture content meets the standard;
- Batch control: Use the same batch of material for the same wall surface in the same space to avoid color differences;
- Acceptance Basis: Performance indicators are subject to the valid test report for the selected model; no verbal commitments are made.
Record notes: This section is a summary of key points from the communication process, used to explain how the plan was finalized. The text contains no performance commitments or price commitments;The avatar and nickname are illustrative graphics and do not represent the customer's actual image.
Seven, usage effects and daily maintenance
7.1 What is the perception of space?
The first effect of the rammed earth board is the disappearance of boundaries. The storefront, entrance partition, open seating wall, private room wall, small condiment station, and corridor end-view all use the same material and the same color tone; as guests walk from the street to the innermost private room, there is no feeling of "switching to another space."
The second effect is the texture only becomes visible up close. The rough texture of rammed earth is very clear within 1 meter, and 2 meters away it fades into a red area with a sense of fine particles - this is the safest way to use it over a large area: close-up details and a whole view from a distance.
7.2 Daily maintenance
| Scenario | Treatment method |
|---|---|
| Daily floating dust | dry cloth or feather duster |
| Water stains / beverage stains | Wipe with clean water or neutral detergent |
| Oily stains | Neutral cleaner,Avoid strong solvents |
| Minor scratches | Judged by texture type; textured surfaces themselves are relatively tolerant of minor marks |
| Prohibited practices | Strong acid and strong alkali solvents, steel wool, grinding machines |
Maintenance-related characteristics of the material itself (from product documentation):
- Waterproof and moisture-proof: The material does not absorb water, so walls are less prone to dampness and mold after construction;
- Mildew resistance: Suitable for humid environments and underground spaces; routine maintenance is mainly wiping;
- Anti-crackingThe flexible substrate can absorb minor substrate deformation, making the finish less prone to fine cracks;
- Stain resistance and cleaning: The surface is dense and not prone to staining; daily wiping with water or neutral cleaner is sufficient.
7.3 On-site Recheck After Delivery
| Review items | Inspection content | Basis for determination |
|---|---|---|
| Joints and closures | Whether joint lines are straight, whether lines are aligned, whether corners are properly executed | no obvious misalignment by visual inspection |
| Cutouts and panels | Whether the switch and socket are coaxial with the cutout and whether the edges are chipped | Panel coverage with no exposed edges |
| Whole wall | Whether there is hollowing or obvious color difference | Hollowing rate 0; no visible color difference on the same wall |
Diameter specification: The above are the conventional characteristics of the material itself and the review method.For engineering indicators in specific projects (wear cycles, stain resistance grade, etc.), please refer to the valid test report of the selected model and project technical confirmation.
7.4 Cost Reference
Flexible stone'sPrice range is 25–300 yuan/㎡, the span is relatively large, depending on specifications, thickness, texture process, order quantity, and delivery time.
Cost rough estimate for this project (◆ rough estimate): Apply at 25–300 yuan/㎡ to the budget estimate area:
| Item | Calculation | Result |
|---|---|---|
| Lower limit of material amount | 260 × 25 | Approx. RMB 7,000 |
| Upper limit of material amount | 260 × 300 | Approx. RMB 80,000 |
Why is the range so wide: 25–300 CNY/㎡ covers the full range from economy texture to custom large slabs, the actual unit price depends on specifications, thickness, texture technology, order quantity and delivery time.The actual transaction amount of this project is subject to the contractnot disclosed on this page.
VIII. Common questions (FAQ)
If rammed earth panels are used on the storefront, how many years can they last outdoors?
The material has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades; however, weather-resistant adhesive must be used outdoors, with proper edge sealing and waterproofing. If drainage at the junction between the upper edge of the storefront and the canopy is poor, water will seep back into the substrate along the edge trim, manifesting as local bulging of the finish—this is the most common failure mode of storefronts, and the method is more critical than the material.
If the facade and interior use the same product, how is color difference controlled?
Must same batch. The storefront and interior walls are seen at the same time at the entrance, and slight color tone differences between different batches are most obvious at this position. For large-area projects, it is recommended to prepare sufficient quantity in one go and mix the material during installation.
The rammed earth texture has reliefs — will it collect dust and be hard to wipe?
The surface of the rammed earth board is dense, not bare earth; for daily care, simply wipe with clean water or a neutral cleaner, and remove floating dust with a dry cloth or feather duster. Note that do not use strong solvents or scrub with steel wool; for high-frequency contact positions such as the dining table against the wall, it is recommended to reserve spare material for partial replacement.
Why are high-gloss surface materials not suitable for hot pot restaurant walls?
High-gloss surfaces reflect pendant lights and light boxes into a sheet of light spots. Hot pot restaurants already have steam and warm light, so reflections will be even more chaotic; in addition, high-gloss surfaces show fingerprints and grease very conspicuously. Matte textured rammed earth panels can absorb light and offer greater tolerance.
IX. Project File and Contact Information
| Project file | Content |
|---|---|
| Project type | Dining entrance facade |
| Materials used | Red Rammed Earth Board (Rammed Earth and Cement) |
| Material specifications | 1220×2930mm | thickness 2.5–3.5mm | single piece about 17kg |
| Packaging | 70 Sheets/Case | Approximately 250.2㎡/Case |
| Construction process | Full bonding method, direct wall installation after leveling, no keel required |
| Implementation standards | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' |
| Project location | Suining City, Sichuan Province |
| Wall area | Approx. 260 ㎡ (◆ budget estimate) |
| Actual photo record | 8 pieces |
Chengdu Igoods Technology Co., Ltd. (IGOODS) Flexible Stone · PU stone skinwall panel · wood paneling wall · WPC grid panel · Same color wall cabinet door
- Phone / WeChat / WhatsApp: 19136341389
- Email: 19136341389@163.com
- Address: Room 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road (Laifeng Digital Innovation Center), Wuhou District, Chengdu, Sichuan Province, China
- Services: Free sample delivery · Selection advice · Project quotation · Installation guidance · After-sales response
Content and scope statement: This page records the wall material selection and construction process for this restaurant storefront. The material specifications, performance parameters and applicable standards in the text all come from IGOODS product materials and can be verified independently; values marked "★ Engineering Experience" are common industry practices and empirical ranges and are not cited as national standard data; those marked "◆Estimate" are estimated values for area, schedule, and cost calculated according to common industry magnitudes, used to judge the order of magnitude, not measured bills; actual values are subject to project confirmation. The cost section is only used to explain the pricing logic and does not represent an actual bill. The full text contains no performance promises, price promises, or brand rankings. Images are used to display materials and spatial applications; communication materials must be verified against original records and are not to be used as customer acceptance or measured proof.
Relevant Materials and Solutions
Flexible Stone Solutions Selection Guides Request sample quotationFind the appropriate wall expression for your project.
Provide the type of space, wall area, and design intention. Communicate about materials, samples, and quotations.