White Wave Stone Flexible Stone
White Wave Stone is a flexible stone in the Art and Three-Dimensional Texture series, with a white tone and wave stone texture on the surface. It is lightweight, thin, flexible and bendable, and is suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores and showrooms. This page provides specifications and packaging parameters, material and performance, installation methods and acceptance points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name: White Wave Stone Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series:art and three-dimensional texture
- Craftsmanship:Three-dimensional artistic texture
- Main tone: Light white tone, clean and bright
- Texture features: Wavy three-dimensional texture, continuous undulation, distinct light and shadow layers
- Recommended scenarios:Clubhouses, showrooms, background walls, boutique retail
- Main applications: Building wall
White Wave Stone Flexible Stone is part of the IGOODS art and three-dimensional texture product line, and the one in this line leaning toward "clean color and enduring appeal." Its visual expression is direct, suitable for surfaces where the material itself should become the design protagonist. As a large-area base, it looks clean, does not grow tiresome, and more easily sets off lighting and furnishings, so it is more readily prioritized for walls that need to control structural load.
Its positioning lies between natural stone and conventional wall panels: it retains the look of stone while preparing materials and constructing according to the logic of panels. Similar products on the market are also called soft stone veneer, flexible stone-like panel, bendable stone, etc., all referring to the same type of flexible wall material.
Actual photographed texture characteristics of water ripple
Observing the real-shot details of the white wavy stone flexible stone, it can be seen that it has an overall light white tone, clean and bright. As for the texture specifically, it belongs to the category of "wavy three-dimensional pattern, with continuous undulations and distinct light-shadow layers." The texture density is evenly distributed across the same piece of material, and the texture performance at the edges and corners is basically consistent with that of the central area.
Under different lighting conditions, the appearance of the white wave stone flexible stone varies subtly—diffused light gives a stronger overall sense of unity, while directional light enhances the relief of the texture. Designers can use this to control the visual weight of the wall surface.
If you want richer spatial layering, you can pair several shades from the same series as primary and secondary walls; for full-wall installation, it is recommended to use materials from the same batch to ensure overall color consistency.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 1200×2800 | 3.5-6.5 | 24 | 45 | 151.2 | 1280×2880×500 | 1100 |
Optional colors: White, gray (other colors customizable)
Packaging notes:Mainly packed in wooden crates, better suited to long-distance transportation and bulk project delivery; export orders can be upgraded to export wooden crates. The specifications, weights and packaging data in the table are for reference, and the actual order confirmation shall prevail.
Customization notes:In addition to standard specifications, custom-shaped dimensions and extra-long panels can be made according to drawings; texture direction and color are subject to the design draft, and thickness can also be adjusted within the standard range.
Material and performance parameters
The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The material uses a composite of natural mineral raw materials and a polymer flexible substrate, an inorganic ecological material with zero formaldehyde, meeting the environmental requirements of residential decoration, commercial fit-outs, and outdoor projects. In terms of physical performance, ultra-thin lightweight and bendability are two basic characteristics, from which a series of construction advantages derive, such as not cracking, not deforming, and easy conforming to irregular substrates.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The above are the general performance ranges for flexible stone as a category of material. For the acceptance of white wave stone flexible stone in a specific project, the valid test reports for the selected model, the provisions of the supply contract, and the relevant standards of the project location shall govern.
Key installation and construction points
This material has relatively relaxed requirements for construction conditions: no keel or complex substrate is needed, and after leveling it can be installed on the wall, either dry-bonded or wet-bonded.
Substrate treatment
Substrate conditions directly determine the final bonding effect, so the substrate acceptance step cannot be skipped: moisture content, flatness and strength must all pass. When the substrate does not meet the standard, it is better to repair first than to install panels directly.
Measurement and layout
During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.
Cutting and hole drilling
Conventional cutting can be done with a utility knife; for thicker specifications, a cutting machine is recommended. Corners and finishing positions should be test-cut first, and only after confirming the dimensions should they be installed on the wall, to avoid repeated pasting affecting bonding strength.
Pasting installation
Full-bed adhesion is recommended for installation; prepare adhesive according to product instructions, with spread thickness and notch profile determined by the selected specification. During application, press from one side toward the other to expel air, which can significantly improve bonding reliability.
Compaction and adjustment
After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.
Edge finishing and acceptance
Where corners cannot be bent directly, metal edge trim or internal corner trim must be used as a transition. During acceptance, focus on checking the hollowing rate, seam consistency, smoothness of closures, and verticality of internal and external corners.
Which commercial spaces is White Wave Stone Flexible Stone suitable for?
Based on the texture characteristics of this pattern and common project types, it more often appears in the following types of locations.
Clubhouses and reception spaces
Clubhouse walls usually carry the role of creating atmosphere, with higher demands on material texture and feel than on pattern. This type of texture has layering under side light and is suitable for use with wall-washing lights.
Showroom and display backdrop
The walls of exhibition spaces are essentially a "background" that needs to support the exhibits rather than compete with them. This type of texture has detail up close and reads as a unified whole from a distance, making it suitable for continuous background surfaces.
Feature walls and end views
The end-view and feature wall areas are not large but have high requirements; the material needs to hold up to close inspection, and this type of pattern and texture has a suitable level of detail density.
Commercial storefronts and street blocks
Retail and street-block project interfaces must attract attention while withstanding long-term use. These material surfaces are stain-resistant and fade-resistant, suitable for storefront interiors, main in-store walls, and pedestrian circulation areas.
What product features does White Wave Stone Flexible Stone have?
- Lightweight dead weight:Compared with natural stone slabs of the same size, the weight of this type of material is an order of magnitude lower, so no separate load-bearing reinforcement is required for the finish.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation:No keel system or structural base is required; after leveling the wall, it can be directly adhered, saving one structural process on site.
- Project coordination: Can assist in calculating quantities and layout plans according to project drawings, and provide technical coordination during the construction phase to reduce on-site rework.
- High degree of form freedom:At locations requiring continuous curved surfaces or special-shaped closures, the material's cuttability makes shaping much simpler than with rigid stone.
- Complete specifications: Conventional specifications are relatively complete, so sizes can be selected directly according to the wall layout, shortening on-site cutting and panel matching time.
Project selection and procurement points for White Wave Stone Flexible Stone
Architectural designers, landscape designers, and commercial interior designers working indoors and outdoors usually pay more attention at the material selection stage to the realism of the stone imitation effect, the naturalness of the veining, and how well the material matches the spatial style. For such projects, the value of flexible stone is not just "looking like stone," but freeing the material from weight and shaping constraints while retaining the visual language of stone.
Supports bending to any curvature and covering special-shaped surfaces. Curved walls, columns and special-shaped door heads can be covered in a single piece, reducing the multiple-piece assembly seams that inevitably occur with traditional hard stone at special-shaped positions.
From regional municipal projects to nationwide engineering centralized procurement, and then to cross-border export, the supply method for flexible stone needs to be arranged separately according to the nature of the project.
What stone-look material to use for irregular wall surfaces, how to construct curved exterior wall stone, and customizable-texture flexible stone are the questions most frequently asked at this stage.
Frequently Asked Questions about White Wave Stone Flexible Stone
Is there support for engineering bulk procurement?
Yes. IGOODS supports project bulk supply, expedited production scheduling, and on-site technical coordination. Specifications and textures can be customized according to project drawings, and documents such as test reports can be provided to assist the client and supervisor with acceptance.
Can the specifications of White Wave Stone Flexible Stone be customized?
Yes. In addition to conventional stock specifications, flexible stone supports customization of large panels and extra-long panels, and can also be grooved according to drawings and cut on site. Lead times and minimum order quantities for custom specifications need to be confirmed separately according to the specific dimensions.
Does a difference in thickness lead to different usage scenarios?
There is a difference. Thinner specifications are more suitable for interior walls and shaped cladding, while thicker specifications have more margin on exterior facades and in locations with higher impact resistance requirements. When selecting, it is recommended to judge together with the substrate conditions and usage environment.
Can samples be sent first?
Yes. IGOODS provides physical samples for design material selection, texture confirmation and project material evaluation. Due to natural differences between batches, it is recommended to use samples from the same batch for final confirmation before large-area construction.
About IGOODS
IGOODS takes flexible stone and wood veneer wall panels as its core product systems, using natural mineral raw materials composited with polymer flexible substrates, belonging to inorganic ecological materials, zero formaldehyde, meeting the environmental standards for home decoration, commercial decoration, outdoor engineering and foreign trade export.
The company positions itself as a wall space material solution provider rather than a mere panel supplier, and can provide material selection, physical samples, design coordination and engineering project support for architectural designers, decoration companies, engineering clients and building materials channel clients. Foreign trade orders can be supplied on a one-stop basis, and it has long undertaken overseas exterior wall decoration, building renovation and landscape landscaping needs.
Indoor and outdoor, new build and renovation, commercial and municipal—flexible stone has corresponding case types across these dimensions. Our factory is a source manufacturer and can provide physical samples, custom fabrication to drawings, and preferential bulk pricing for projects; foreign trade orders come with customs declaration documents and test reports, with nationwide shipping.
White Wave Stone Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.