White nebula stone flexible stone
White nebula stone is a flexible stone in the art and three-dimensional texture series, with a white tone and nebula stone texture on the surface. It is lightweight, thin, flexible, and bendable, suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores, and showrooms. This page provides specifications and packaging parameters, material and performance, installation methods and acceptance points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name:White nebula stone flexible stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series:art and three-dimensional texture
- Craftsmanship:Three-dimensional artistic texture
- Main tone: Light white tone, clean and bright
- Texture features:Nebula-like three-dimensional texture, mottled light and dark, rich in layers
- Recommended scenarios:Clubhouses, showrooms, boutique retail, themed spaces
- Main applications: Building wall
White nebula stone flexible stone is a flexible stone from IGOODS Art & Three-Dimensional Texture. This product line is mainly designed around three-dimensional artistic embossing and geometric undulation. White Nebula Stone Flexible Stone emphasizes the expression of "clean color and lasting appeal"—as a large-area base, it looks clean and does not become tiresome to look at, and it more easily sets off lighting and furnishings.
Flexible stone is a type of veneer material used more often in recent years in commercial fit-outs and exterior walls. Names vary by region: soft stone, flexible stone, flexible stone-look panels, and bendable stone basically refer to the same type of product.
Actual photographed texture characteristics of Nebula Stone
As seen in the actual product photo, this White Nebula Stone flexible stone is overall a light white tone—clean and bright—and its texture can be summarized as "nebula-like three-dimensional texture, with mottled light and dark and rich layers." The grain runs continuously with natural transitions and no abrupt splice breaks; once installed on the wall, it maintains a consistent appearance under both natural light and artificial lighting.
Light has a fairly obvious effect on this color: under natural side light, the light-colored portions show undulating layers, while under artificial downlights or light strips they appear more even. This also means the same material can be used for an entire feature wall or just a local accent wall.
It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 1200×2800 | 3.5-6.5 | 24 | 45 | 151.2 | 1280×2880×450 | 1150 |
Optional colors:White, black (other colors customizable)
Packaging notes:Mainly packed in wooden crates, better suited to long-distance transportation and bulk project delivery; export orders can be upgraded to export wooden crates. The specifications, weights and packaging data in the table are for reference, and the actual order confirmation shall prevail.
Customization notes: Supports custom large panels, small panels and special-shaped dimensions. Texture direction, color, texture and thickness can all be adjusted according to project requirements.
Material and performance parameters
The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The substrate is a composite of natural mineral raw materials and polymer flexible materials, an inorganic ecological system with no added formaldehyde, suitable for both indoor and outdoor use environments. The material is light, thin, and flexible, can be bent, and is not prone to cracking or deformation; it also has comprehensive performance of flame retardancy, moisture resistance, stain resistance, and UV resistance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
Please note that the performance of flexible stone is closely related to substrate conditions, adhesive selection, and installation workmanship. The table above presents the general characteristics of the material itself. For the engineering indicators of White Nebula Stone flexible stone in specific projects, please refer to the valid test report for the selected model and the project technical confirmation.
Key installation and construction points
On the construction side, no keels or complex substrate preparation are required; panels can be installed once the wall is leveled, and both dry bonding and wet bonding are compatible. Flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls can all be handled accordingly.
Substrate treatment
The core requirements for the substrate are "flat, dry and firm": check flatness with a 2 m straightedge; for walls with high moisture content, apply a sealing primer first; sanding and loose layers need to be removed down to a solid substrate. The selection of interface agents differs for different substrates, and it is recommended to confirm according to on-site conditions.
Measurement and layout
During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.
Cutting and hole drilling
Conventional cutting can be done with a utility knife; for thicker specifications, a cutting machine is recommended. Corners and finishing positions should be test-cut first, and only after confirming the dimensions should they be installed on the wall, to avoid repeated pasting affecting bonding strength.
Pasting installation
Spot bonding is not suitable for flexible stone; full-surface bonding is required—this affects not only bonding strength but also whether the finish will bulge under temperature differences due to local cavities. The open time of the adhesive changes with temperature; in summer construction, the area spread in a single application should be controlled.
Compaction and adjustment
After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.
Edge finishing and acceptance
For internal and external corners, closures and junctions between different materials, same-color edge trim and internal/external corner strips are recommended. Exterior wall projects should have dividing joints and sealing done according to standards; after completion, check joint flatness, overall color difference and facade verticality.
What commercial spaces is white nebula stone flexible stone suitable for?
The following explains, by project type, where it is suitable and the main reasons for choosing it.
Clubhouses and private dining spaces
In low-illuminance environments, the undulation and texture of the material are more easily perceived than color. The surface undulation of this type of flexible stone can form natural light-dark transitions under light strips or downlights.
Showroom and display backdrop
The walls of exhibition spaces are essentially a "background" that needs to support the exhibits rather than compete with them. This type of texture has detail up close and reads as a unified whole from a distance, making it suitable for continuous background surfaces.
Commercial storefronts and street blocks
Retail and street-block project interfaces must attract attention while withstanding long-term use. These material surfaces are stain-resistant and fade-resistant, suitable for storefront interiors, main in-store walls, and pedestrian circulation areas.
What product features does white nebula stone flexible stone have?
- Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
- Flexible and bendable: It can conform to the curvature of the substrate; this is the most fundamental difference from rigid stone. The degree of bending is related to panel thickness, so it is recommended to confirm the bendable radius at the design stage.
- No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
- High degree of form freedom: Bendable, cuttable and capable of full-panel wrapping; curved walls, columns and irregular entrance headers no longer need to be split into multiple small pieces for assembly.
- Complete specifications: Conventional specifications are relatively complete, so sizes can be selected directly according to the wall layout, shortening on-site cutting and panel matching time.
- Texture customizable: Stone texture direction can be customized to marble vein, granite vein, cultured stone texture, travertine texture, vintage stone texture, etc.; color, texture, and thickness can all be adjusted according to project requirements.
Project selection and procurement points for white nebula stone flexible stone
Architectural designers, landscape designers, and commercial interior designers working indoors and outdoors usually pay more attention at the material selection stage to the realism of the stone imitation effect, the naturalness of the veining, and how well the material matches the spatial style. For such projects, the value of flexible stone is not just "looking like stone," but freeing the material from weight and shaping constraints while retaining the visual language of stone.
Supports bending to any curvature and covering special-shaped surfaces. Curved walls, columns and special-shaped door heads can be covered in a single piece, reducing the multiple-piece assembly seams that inevitably occur with traditional hard stone at special-shaped positions.
Procurement demand is geographically widespread: local projects value response speed, while cross-regional projects place more emphasis on bulk supply and production scheduling capability.
What stone-look material to use for irregular wall surfaces, how to construct curved exterior wall stone, and customizable-texture flexible stone are the questions most frequently asked at this stage.
White nebula stone flexible stone FAQ
Is there support for engineering bulk procurement?
Yes. IGOODS supports project bulk supply, expedited production scheduling, and on-site technical coordination. Specifications and textures can be customized according to project drawings, and documents such as test reports can be provided to assist the client and supervisor with acceptance.
What common specifications does white nebula stone flexible stone have?
The specific available specifications for white nebula stone flexible stone are shown in the "Specifications and Packaging Parameters" table above. Flexible stone regular stock covers multiple sizes and supports custom large panels, small panels, and irregular sizes; actual supply specifications must be confirmed in combination with the selected thickness and packaging method.
How thick is white nebula stone flexible stone usually?
The common thickness of flexible stone ranges from 2.3–9mm, with considerable variation across different patterns and specifications. For the thickness range of White Nebula Stone flexible stone, refer to the specification table above; the specific thickness is subject to order confirmation.
Can samples be sent first?
Yes. IGOODS provides physical samples for design material selection, texture confirmation and project material evaluation. Due to natural differences between batches, it is recommended to use samples from the same batch for final confirmation before large-area construction.
Can white nebula stone flexible stone be used for curved walls or columns?
Flexible stone itself has bendable characteristics and can wrap curved walls and columns. However, the specific bendable radius depends on the thickness of the selected model and the substrate conditions. It is recommended to make a physical sample for verification before construction, and not to judge solely by the attribute of "flexible material" that all curved surfaces can be constructed directly.
About IGOODS
IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.
Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.
Indoor and outdoor, new build and renovation, commercial and municipal—flexible stone has corresponding case types across these dimensions. Our factory is a source manufacturer and can provide physical samples, custom fabrication to drawings, and preferential bulk pricing for projects; foreign trade orders come with customs declaration documents and test reports, with nationwide shipping.
White nebula stone flexible stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.