Hollow Four-Cell Grille Panel GW-N700

The Hollow Four-Cell Grille Panel GW-N700 is a vertical grille panel in the IGOODS WPC grille panel series, with a cross-section of 146 × 16.5 mm and a panel length of 3000 mm. It has a hollow structure (4 cells) and can be installed as a full panel or spliced horizontally, creating a regular vertical line rhythm on wall and column surfaces.

This page introduces the specifications, colors, and application information of this model; the actual applicable parts need to be confirmed in combination with product information, base layer, and project requirements. Support sample and engineering quotation consultation.

Category:WPC grid panel Release:2026-11-13

Product quick information

  • Product name: Hollow Four-Cell Grille Panel GW-N700
  • Brand: IGOODS
  • Product category: WPC grid panel
  • Product number: GW-N700
  • Cross-section specification: 146 × 16.5 × 3000 mm (width × height × length)
  • Structural form: Hollow structure · 4 cells
  • Texture features: Vertical grille texture, even and straight lines, hollow structure with rich layers of light transmission
  • Recommended scenarios:Hotel guest rooms, B&Bs, offices, clubs, showrooms
  • Main applications: Wall decoration, background walls, column cladding finishes

Hollow Four-Cell Grille Panel GW-N700 is a vertical grille panel in the IGOODS WPC grille panel series, with a cross-section of 146 × 16.5 mm and a panel length of 3000 mm, and a hollow structure (4 cells). It can be installed as a full panel or joined horizontally, creating a regular rhythm of vertical lines on walls and columns. It is suitable for feature walls, wall surfaces, and column cladding in hotel guest rooms, homestays, offices, clubs, showrooms, and other spaces. It is a prefabricated quick-install material that can be cut on site and mounted on the wall.

Texture and Appearance of the Hollow Four-Cell Grille Panel GW-N700

The expressiveness of this type of product comes from the relationship between surface texture and light: the height differences in the texture only produce light-dark transitions when spotlights hit at an angle, and appear relatively flat under direct light. When choosing colors, it is recommended to compare under the project's actual lighting; showroom lighting differs considerably from the site.

Specification parameters

ProjectParameters
Product numberGW-N700
Cross-section specification (width × height)146 × 16.5 mm
Sheet length3000 mm
Structural formHollow structure (4-cell)
VeneerWood-grain finish

Material and performance parameters

The material's performance comes from the structure itself, not from being made thicker. The table below lists items directly related to material selection, among which combustion performance and environmental grade are subject to the valid test reports for the selected model.

ProjectParameter description
Composition of materialsWood-plastic composite (WPC) extruded profile, hollow structure, straight lines
Fabric processCo-extruded surface, wood grain or solid-color finish
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofNon-absorbent; after installation, the wall surface is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance
Anti-crackingThe substrate can absorb minor wall deformation, making the finish less prone to fine cracks
Can be bentProfile direction fixing; transverse bending is not recommended; use short segments spliced together for curved areas
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemCross-section specification, length, color and installation accessories
Sample specificationsPhysical samples can be provided for design material selection and color confirmation

Key installation and construction points

Setting out and positioning

First snap lines on the wall or ceiling according to the design spacing to determine the starting position and spacing of the grille. Consistent spacing is the most critical item for this type of material; if the starting line is wrong, the entire subsequent row will be off.

Fixing method

Can be installed as full panels or spliced horizontally; fix to the substrate with matching clips or by direct nailing. For hollow walls, first locate the studs to ensure fasteners reach a load-bearing substrate.

On-site cutting

Profile length is cut to on-site dimensions, and cut ends are sealed with end caps or edge trim pieces. Use matching pieces for transitions at corners and closures to avoid exposing the hollow cross-section of the profile.

Column surface and irregular shapes

For column wrapping, install in sections according to the column diameter, keeping seams at the side-rear; for irregular corners, use short segments rather than forcibly bending profiles.

Top and closures

For ceiling installation, first confirm the load-bearing capacity of the suspended-ceiling substrate; at junctions with the ceiling and walls, press the edge with a trim strip and leave a 3–5mm reveal.

Acceptance key points

Check item by item the consistency of spacing, verticality, and firmness of fixation; use a straightedge to check facade flatness, and visually check for obvious color differences and misalignment.

Which Commercial Spaces Is the Hollow Four-Cell Grille Panel GW-N700 Suitable For?

Hotel guest rooms and corridors

Hotel guest rooms and corridors. When selecting, focus on substrate conditions and shaping requirements: flat substrates can be directly applied, curved and column-wrapped areas can be covered in one piece, and joints can be transitioned with matching accessories.

office and commercial space

Office and commercial spaces. When selecting, focus on substrate conditions and shaping requirements: flat substrates can be directly adhered, curved and column-clad areas can be covered in a single piece, and matching pieces are used to transition at closures.

Column wrapping and screens

Column wrapping and screens. When selecting, focus on the substrate conditions and shaping requirements: flat substrates can be directly laid, curved and column-wrapping areas can be covered in one piece, and closures are transitioned with matching accessories.

Ceiling and wall features

Ceiling and wall features. When selecting, focus on the substrate conditions and shaping requirements: flat substrates can be laid directly, curved and column-wrapping areas can be covered in a single piece, and closures are transitioned with matching accessories.

What Product Features Does the Hollow Four-Cell Grille Panel GW-N700 Have?

The characteristics of WPC grid board are that it can be installed as a whole board or horizontally spliced, and it can be mounted on the wall after on-site cutting; the hollow structure is light in weight and has good light transmittance, with a short installation period when used for column wrapping and ceiling shaping.

Project Selection and Procurement Key Points for the Hollow Four-Cell Grille Panel GW-N700

First check the substrate: substrate strength, flatness and moisture content determine whether direct bonding is possible; hollow and sandy areas must be treated first. Then check the shape: whether arcs, column wraps and special-shaped corners can be covered in one piece, and whether matching trim pieces are available. Finally check schedule and maintenance: methods without keels and without wet work can significantly compress the schedule, and daily cleaning only requires a neutral cleaner.

Procurement specifications: Convert to length for ordering based on the facade area; spacing determines usage: the smaller the spacing, the greater the usage. Columns and edge finishing are calculated separately.

Frequently Asked Questions About the Hollow Four-Cell Grille Panel GW-N700

How much material does a project roughly need?

Convert to length for ordering based on the facade area; spacing determines usage: the smaller the spacing, the greater the usage. Columns and edge finishing are calculated separately.

Will the color of samples and bulk supply be consistent?

Within the same batch, the tone is relatively stable; slight differences may exist between different batches. It is recommended to use the same batch of material for the same project and to mix the material once before installation to disperse any possible color difference.

Can the renovation of the old wall be directly pasted?

If the original wall surface is firm and has no hollowing, it is possible; old tile surfaces can also be covered directly. But before construction, each surface must be checked for hollowing, and hollowed areas must be knocked out and redone—this step cannot be skipped.

Can it be used in damp areas?

The material itself does not absorb water, and after construction the wall is less prone to dampness and mold, so it can be used in humid environments and underground spaces. For wet areas such as washrooms, it is recommended to confirm the specific scope with the dry/wet zoning plan.

What about fire performance?

The material has flame-retardant properties; the specific combustion performance rating is subject to the valid test report for the selected model. If the project has explicit fire rating requirements, please state them before ordering.

Can a single damaged panel be replaced later?

Yes. During layout, the seam lines and termination positions have already been determined, and a single piece can be pried out from the termination for replacement. It is recommended to reserve a small amount of same-batch material as spares at delivery.

How to confirm color and texture?

It is advisable to request physical samples and compare them under the project's actual lighting before deciding the color number. There are differences between screen display and actual materials, and the same material also looks different at different angles and color temperatures.

About IGOODS

IGOODS is a supplier of flexible stone, PU stone veneer wall panels, wood veneer wall panels, WPC slatted panels and same-color wall cabinet doors, serving commercial spaces, hotels and homestays, real estate fine decoration, urban renewal and cultural tourism projects. The products are mainly characterized by being lightweight, bendable and installation without furring, and support specification and color customization, free sample sending and engineering batch supply.

From interior walls to building facades, from full commercial interior fit-outs to renovation of old buildings, material selection must simultaneously consider substrate conditions, shaping requirements, construction period and maintenance costs. The specifications and methods provided in this article are for material selection reference; the contract terms and on-site conditions shall prevail.

Project model selection and on-site verification

Selected for use Hollow Four-Cell Grille Panel GW-N700 First, check the product information on this page, and then confirm the scheme in combination with the application location, foundation and installation structure. The following is the check method for procurement and construction, which does not replace the detection conclusion of this model.

Selection checklist: items to check, how to judge, and required documents
Check itemsJudgment methodRequired information
Section and lengthCheck the width, height, board length, and hollow or solid structure separately, to avoid confusing the section size and the whole board size.Section drawings, specifications table and samples
Installation Direction and SeamConfirm the support and fixing requirements for vertical, horizontal, column wrapping, or top surface shape.Layout diagram, fixed nodes and on-site conditions
Quantity calculationCalculate the effective coverage width and installation length of the product, and additional costs for joints, corners, and cutting losses.Layout list, effective coverage size and accessories table
Applicable environmentMoist, outdoor or roof use requires confirmation of model and installation structure separately.Product description, project requirements, and technical confirmation

Parameter basis and data verification

Product information
The specifications, packaging and color information of this page are released by the IGOODS official website. When purchasing, please ask for the specification confirmation sheet according to the product name and model, check the data unit, single piece and whole box diameter; customized configuration shall be based on the confirmed documents by both parties.
Performance and testing
The performance description should be combined with the sample name, specifications, structure, testing items, basis, and issuance date of the report for verification. Projects that are not listed on this page cannot be identified solely based on general descriptions that the model has met the project requirements
Construction reference
Construction suggestions for early communication. When the base, adhesive, fastener, arc, and usage environment change, the node method should be reconfirmed, and on-site sample verification should be carried out.

Learn about the subject matter → Company and production information; when materials need to be verified, please refer to Contact page Provide the product name, model, and project requirements on this page.

Sample selection and purchasing FAQ

How to confirm that this product is suitable for my project?

Determine the material direction using the specification and project selection checklist on this page, then provide the application location, base material photos, dimensions, and on-site conditions to confirm the product model, node construction, and required inspection materials. Separate verification should be performed when involving external walls, damp environments, ceilings, or special functional requirements.

How are the picture and sample used to confirm the color?

Picture used for preliminary screening. Screen, lighting, and shooting angle will affect the perception. Before bulk purchase, check the actual color number, texture direction, and splicing effect, and agree on the way to confirm the sample and batch. Appointment available. Exhibition real shots and material selectionOr discuss sample mailing needs.

What information is required when making an inquiry?

Please provide the product name or model, required specifications, application area, net area or quantity, delivery location and expected delivery date; if you have drawings, a wastage list, accessories or testing requirements, please provide them as well. Prices, minimum order quantities, packaging and delivery times are confirmed per specific order.Contact to get sample and engineering quotation。

Continue to select materials and application references

Compare the color and specification of the same type of flowers and return WPC grid panelProduct list. Check material characteristics and construction issues can be viewed. Selection Guides;To organize requirements by space, you may refer to Solutions。

Project CasesTo understand the actual space effect; whether to use the specific model on this page should be based on the material records in the case.

Hollow Four-Cell Grille Panel GW-N700 · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Indoor wall, ceiling, pillar wrapping and cabinet surface (confirmed according to product information)
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Installation Method
Paste with no-screw adhesive or snap-together, the rough masonry wall can be directly constructed (according to product instructions).

Diameter specification:The specifications, thickness, weight, and packaging data on this page are from the product archive, for reference only, and the actual value is subject to order confirmation; the numbers for area, consumption, and project timeline are estimated according to industry levels and are for estimation only, not constituting a quotation commitment. Please provide area, color, and delivery date for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied